44x200mm Welded Masonry Joist Hanger
44x200mm Welded Masonry Joist Hanger
Price: £2.41 (£2.89 inc VAT)
- Product Code: A1-5092
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WM44x200
- Weight: 640.00g
44x200mm Welded Masonry Joist Hanger
Width: 44mm
Height: 200mm
Weight: 640g
44mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 44x200mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: PSG3x13
Delivery Time: In stock, 1-2 days
13mm Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposu..
£2.48
£2.98 inc VAT
Brand: TECO
Model and Size: DWS60
Delivery Time: In stock, 1-2 days
3.5x60mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£11.23
£13.48 inc VAT
Brand: TECO
Model and Size: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.70
£2.04 inc VAT
Brand: TECO
Model and Size: EMLG175
Delivery Time: In stock, 1-2 days
175mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths toget..
£22.71
£27.25 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model and Size: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT