Light Duty Restraint Strap 220mm Flat

Light Duty Restraint Strap 220mm Flat
Rate this product
Light Duty Restraint Strap 220mm Flat
Price: £0.55 (£0.66 inc VAT)
  • Product Code: A1-5368
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD220F
  • Weight: 112.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 220mm Flat

Length: 220mm
Width: 28mm
Thickness: 2.4mm
Weight: 112g

Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

75x75mm Galvanised Steel Bolt Down Shoe
Brand: TECO Model: FB75
Delivery Time: In stock, 1-2 days
75x75mm Galvanised Steel Bolt Down Shoe
75x75mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. InstallationTo bolt down onto existing concrete.Suggested fixing 10 x 80mm sleeve anchor...
£11.11
£13.33 inc VAT
200mm Starter Tie with plugs - pack of 10
Brand: TECO Model: SST200
Delivery Time: In stock, 1-2 days
200mm Starter Tie with plugs - pack of 10
200mm Starter Ties are used where new walls are being built directly from existing brickwork. There is a drip feature for use where there is a cavity and a new wall needs to be built. Grade 1.4301 austenitic stainless steel to EN 10088-2. Features Stainless steel, Diameter 4mm,Supplied complete with..
£20.25
£24.30 inc VAT
132x150mm Welded Masonry Joist Hanger
Brand: TECO Model: WM132x150
Delivery Time: 2 - 4 days
132x150mm Welded Masonry Joist Hanger
132mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
£8.46
£10.15 inc VAT
76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
76mm M12mm Stainless Steel Single Sided Tooth Plate Timber Connector
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.64
£4.37 inc VAT
47x125mm - R215mm Masonry Return Hanger
Brand: TECO Model: FHMR47X125R215
Delivery Time: In stock, 1-2 days
47x125mm - R215mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.47
£5.36 inc VAT
63x100mm Welded Masonry Joist Hanger
Brand: TECO Model: WM63x100
Delivery Time: 2 - 4 days
63x100mm Welded Masonry Joist Hanger
63mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£4.35
£5.22 inc VAT