100x152mm Multifunctional Joist Hanger
100x152mm Multifunctional Joist Hanger
Price: £2.60 (£3.12 inc VAT)
- Product Code: A1-5268
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT100/404BA - 100x152
- Weight: 501.00g
100x152mm Multifunctional Joist Hanger
Width: 100mm
Height: 152mm
Thickness: 2mm
Weight: 501g
100mm x 152mm Multifunctional Joist Hanger 100 x 152mm is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 100x152mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: TCSS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Single Sided Tooth Plate Timber Connectoris designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produce..
£1.22
£1.46 inc VAT
Brand: TECO
Model: EMLG305
Delivery Time: In stock, 1-2 days
305mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths toget..
£44.12
£52.94 inc VAT
Brand: TECO
Model: WM100x200
Delivery Time: 2 - 4 days
100mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.31
£6.37 inc VAT
Brand: TECO
Model: LL - 44x450
Delivery Time: In stock, 1-2 days
44x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.41
£4.09 inc VAT
Brand: TECO
Model: LD450B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 450mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£0.82
£0.98 inc VAT
Brand: TECO
Model: WNT - 44x308
Delivery Time: In stock, 1-2 days
44mm x 308mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT