90x225mm R100mm Welded Return Hanger

90x225mm R100mm Welded Return Hanger
Price: £5.84 (£7.01 inc VAT)
- Product Code: A1-5303
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model and Size: WR90X225R100
- Weight: 1,136.00g
90x225mm R100mm Welded Return Hanger
Width: 90mm
Height: 225mm
Thickness: 2.4mm
Weight: 1136g
90mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but any variations can be made to order. Made from 2.4mm thick pre-Galvanised steel EN 10346 DX51D Z275. Also available in stainless steel.
Installation 90x225mm R100mm Welded Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard.
Specification
- Galvanised steel EN 10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088-2.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd Notification Body No.1289.
Brand: TECO
Model and Size: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: GBCLIP225/50
Delivery Time: In stock, 1-2 days
225mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to fence posts. Width 50mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£2.06
£2.47 inc VAT
Brand: TECO
Model and Size: US3.5x30
Delivery Time: In stock, 1-2 days
3.5x30mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc..
£4.73
£5.68 inc VAT
Brand: TECO
Model and Size: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: FDT
Delivery Time: In stock, 1-2 days
Drive Tool for use with the Fence Spikes and Repair Spikes. ..
£6.26
£7.51 inc VAT
Brand: TECO
Model and Size: HD3000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 3000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£8.85
£10.62 inc VAT