100x277mm Woody No Tag Joist Hanger
100x277mm Woody No Tag Joist Hanger
Price: £0.60 (£0.72 inc VAT)
- Product Code: A1-5037
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WNT - 100x277
- Weight: 192.00g
100x277mm Woody No Tag Joist Hanger
Width: 100mm
Height: 277mm
Thickness: 0.8mm
Weight: 192g
100mm x 277mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request.Also available in Stainless Steel. Long term safe working load = 6 kN.
tag_install.png)
FIXING INSTRUCTIONS for 100x277mm Woody No Tag Joist Hanger
- All holes should be nailed using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 60mm,
- Also available in Stainless Steel,
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers.pdf
Brand: TECO
Model: LD900F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 900mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£1.56
£1.87 inc VAT
Brand: TECO
Model: ARRM
Delivery Time: In stock, 1-2 days
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in cons..
£56.14
£67.37 inc VAT
Brand: TECO
Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT
Brand: TECO
Model: MFM - 100x70
Delivery Time: In stock, 1-2 days
Multifunctional Mini Joist Hanger 100 x 70mm is one of 1.6mm Face Fix Joist Hangers, available in five different sizes with a 86mm bearing. The hanger is produced from pre-galvanised mild steel thickness of only 1,6mm, all in accordance with the specification given in the BS EN 10327:2004 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model: WM90x275
Delivery Time: 2 - 4 days
90mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£9.38
£11.26 inc VAT
Brand: TECO
Model: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.76
£4.51 inc VAT