300mm Damp Proof Course - DPC
300mm Damp Proof Course - DPC
Price: £10.16 (£12.19 inc VAT)
- Product Code: A1-5640
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPC300
- Weight: 3,280.00g
300mm Damp Proof Course - DPC
Length: 30000mm
Width: 300mm
Weight: 3280g
300mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.
Specification
- 500mu.
- Produced to BS 6515:84.
- Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
- Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
- The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM.
Brand: TECO
Model: WR90X200R100
Delivery Time: 2 - 4 days
90mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.70
£6.84 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
£13.64
£16.37 inc VAT
Brand: TECO
Model: TCR
Delivery Time: In stock, 1-2 days
Trip-L-Grip Framing Anchor type CR is an universal anchor that can be used for stronger nailed joints and economical secondary connections in timber framing. Framing Anchors are an effective, versatile and economical method of providing strong, mechanical joints. Suitable for timber of minimum 44 x ..
£0.51
£0.61 inc VAT
Brand: TECO
Model: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.50
£1.80 inc VAT
Brand: TECO
Model: FHM47/150
Delivery Time: In stock, 1-2 days
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.20
£2.64 inc VAT
Brand: TECO
Model: LD200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.55
£0.66 inc VAT