47x150mm - R215mm Masonry Return Hanger
47x150mm - R215mm Masonry Return Hanger
Price: £4.00 (£4.80 inc VAT)
- Product Code: A1-5730
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X150R215
- Weight: 568.00g
47x150mm - R215mm Masonry Return Hanger
Width: 47mm
Height: 150mm
Weight: 568g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x150mm - R215mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: TCDS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm 50mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.34
£0.41 inc VAT
Brand: TECO
Model and Size: FHMR47X150R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model and Size: ARH
Delivery Time: In stock, 1-2 days
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail b..
£3.75
£4.50 inc VAT
Brand: TECO
Model and Size: CSHBZPM10x65
Delivery Time: In stock, 1-2 days
10mm - 65mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied comp..
£21.86
£26.23 inc VAT
Brand: TECO
Model and Size: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT
Brand: TECO
Model and Size: LL - 125x450
Delivery Time: In stock, 1-2 days
125x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£5.09
£6.11 inc VAT