47x200mm - R140mm Masonry Return Hanger
47x200mm - R140mm Masonry Return Hanger
Price: £4.19 (£5.03 inc VAT)
- Product Code: A1-5739
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X200R140
- Weight: 613.00g
47x200mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 613g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: HD3000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 3000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£8.85
£10.62 inc VAT
Brand: TECO
Model: ABG3
Delivery Time: In stock, 1-2 days
Angle Bead is used to provide a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out t..
£1.59
£1.91 inc VAT
Brand: TECO
Model: LD3000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes...
£5.20
£6.24 inc VAT
Brand: TECO
Model: FHMR47X100R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.56
£4.27 inc VAT
Brand: TECO
Model: WM100x125
Delivery Time: 2 - 4 days
100mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.38
£5.26 inc VAT
Brand: TECO
Model: TAPEDW75
Delivery Time: In stock, 1-2 days
75mm wide professional internal plastering joint tapes. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. InstallationTapered drywall joints have special edges that provide a pocket for joint compound and tape.Mix the setti..
£6.36
£7.63 inc VAT