150x150mm Heavy Duty Face Fix Joist Hanger
150x150mm Heavy Duty Face Fix Joist Hanger
Price: £10.13 (£12.16 inc VAT)
- Product Code: A1-5195
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model and Size: HWTNT150
- Weight: 987.00g
150x150mm Heavy Duty Face Fix Joist Hanger
Width: 150mm
Height: 150mm
Thickness: 2.5mm
Weight: 987g
150mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 150x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: CSHBZPM6x100
Delivery Time: In stock, 1-2 days
6mm - 100mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied complete ..
£27.83
£33.40 inc VAT
Brand: TECO
Model and Size: LD1200B100T
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry and also for horizontal restraint. The straps are produced from edge coated galvanised mild steel, also available in stainless ..
£2.29
£2.75 inc VAT
Brand: TECO
Model and Size: WS75x250S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.74
£15.29 inc VAT
Brand: TECO
Model and Size: HWTNT175
Delivery Time: 2 - 3 Days
175mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.13
£12.16 inc VAT
Brand: TECO
Model and Size: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model and Size: HWTNT300
Delivery Time: 2 - 3 Days
300mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£20.38
£24.46 inc VAT