200x150mm Heavy Duty Face Fix Joist Hanger
200x150mm Heavy Duty Face Fix Joist Hanger
Price: £10.81 (£12.97 inc VAT)
- Product Code: A1-5197
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model and Size: HWTNT200
- Weight: 1.07g
200x150mm Heavy Duty Face Fix Joist Hanger
Width: 200mm
Height: 150mm
Thickness: 2.5mm
Weight: 1.07g
200mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 175x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: CSHBZPM10x220
Delivery Time: In stock, 1-2 days
10mm - 220mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£25.93
£31.12 inc VAT
Brand: TECO
Model and Size: FHMST215
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.13
£1.36 inc VAT
Brand: TECO
Model and Size: TFT100
Delivery Time: In stock, 1-2 days
100mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South ..
£0.43
£0.52 inc VAT
Brand: TECO
Model and Size: LL - 44x450
Delivery Time: In stock, 1-2 days
44x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: HBH6/2000
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£9.20
£11.04 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT