Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Heavy Duty Restraint Strap 300mm Flat

Heavy Duty Restraint Strap 300mm Flat
Price: £0.90 (£1.08 inc VAT)
  • Product Code: A1-5428
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD300F
  • Weight: 279.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Heavy Duty Restraint Strap 300mm Flat

Length: 300mm
Width: 28mm
Thickness: 4mm
Weight: 279g

Galvanised Heavyt Duty Restraint Strap 300mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: NP85x87
Delivery Time: In stock, 1-2 days
85x87mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fix..
£46.80
£56.16 inc VAT
Brand: TECO Model: TBHEX10x100
Delivery Time: In stock, 1-2 days
10x100 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fi..
£55.59
£66.71 inc VAT
Brand: TECO Model: TCDS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.50
£0.60 inc VAT
Brand: TECO Model: CSHBZPM6x65
Delivery Time: In stock, 1-2 days
6mm - 65mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£19.91
£23.89 inc VAT
Brand: TECO Model: US3.5x20
Delivery Time: In stock, 1-2 days
3.5x20mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc..
£4.00
£4.80 inc VAT
Brand: TECO Model: WM90x150
Delivery Time: 2 - 4 days
90mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.70
£5.64 inc VAT

Rate this product

Please login or register to review