50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Price: £0.48 (£0.58 inc VAT)
- Product Code: A1-5310
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCSS 50mm M16
- Weight: 13.00g
50mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Weight: 13g
Diameter: 50mm
Teeth Size: 0.9mm
50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10346:2004 DX51D+Z275. Also available in stainless steel option.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 14545:2008.
INSTALLATION
Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT
Brand: TECO
Model: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.20
£5.04 inc VAT
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements..
£73.68
£88.42 inc VAT
Brand: TECO
Model: LD1100F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£1.91
£2.29 inc VAT
Brand: TECO
Model: HD1800B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1800mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£5.09
£6.11 inc VAT