Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Light Duty Restraint Strap 3000mm Flat

Light Duty Restraint Strap 3000mm Flat
Price: £5.50 (£6.60 inc VAT)
  • Product Code: A1-5370
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD3000F
  • Weight: 1,524.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Light Duty Restraint Strap 3000mm Flat

Length: 3000mm
Width: 28mm
Thickness: 2.4mm
Weight: 1524g

Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: NUTFBZPM8
Delivery Time: In stock, 1-2 days
M8 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£7.20
£8.64 inc VAT
Brand: TECO Model: ARRM
Delivery Time: In stock, 1-2 days
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in cons..
£56.14
£67.37 inc VAT
Brand: TECO Model: FHMR47X100R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.14
£4.97 inc VAT
Brand: TECO Model: TUNI
Delivery Time: In stock, 1-2 days
Trip-L-Grip Universal Framing Anchor is an universal anchor that can be bent on site to suit all applications. Used for stronger nailed joints and economical secondary connections in timber framing. Framing Anchors are an effective, versatile and economical method of providing strong, mechanical joi..
£0.49
£0.59 inc VAT
Brand: TECO Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
Brand: TECO Model: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT

Rate this product

Please login or register to review