Damp Proof Membrane - DPM - 4x25m Roll
Damp Proof Membrane - DPM - 4x25m Roll
Price: £69.00 (£82.80 inc VAT)
- Product Code: A1-5633
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPM300B
- Weight: 25,000.00g
Damp Proof Membrane - DPM - 4x25m Roll
Length: 25000mm
Width: 4000mm
Thickness: 0.3mm
Weight: 25000g
Damp Proof Membrane is intended for use within solid concrete floors to prevent the rise of moisture or damp through structure flooring. Suitable for most construction damp proofing requirements. The DPM can be used as either below the slab application, directly below the flooring surface or in a sandwich construction, between base concrete and the screed. Manufactured from recycled polythene to meet PIFA and BBA standards.
Specification
- Manufactured to both BBA and PIFA requirements.
- 1200 gauge (300 micron).
- 4m x 25m.
- High puncture resistance.
Installation
- Unless the application surface is smooth it should be blinded with compacted soft sand to guarantee a soft bed, free from any objects that may puncture the membrane during installation or when concrete is applied.
- It is recommended that the DPM should be covered with a protective layer or screed as soon as possible after the membrane has been installed.
- Care should be taken when applying concrete or screed on top of the DPM to avoid stretching or the DPM being displaced.
- When joining two sheets a minimum overlap of 150mm should be provided between each of the sheets.
- For the best waterproof protection when making a join a double welted fold should be formed between the joining sheets. This should be formed by an overlap of 300mm from both sheets. Alternatively the 150mm overlap can be sealed with 100mm wide jointing tape.
- Any Punctures in the membrane should be patched with sheets of identical thickness lapped at least 150mm away from the perforation edge and sealed with double sided pressure sensitive tape.
- When installed within structures Damp Proof Membrane should be linked to the Damp Proof Course within the structure walls to from a continuous damp proof barrier throughout the structure.
Note: Not recommended for use as a general gas proof barrier system on Brownfield sites or in applications where gases such as radon are present.
Brand: TECO
Model: WM125x150
Delivery Time: 2 - 4 days
125mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.59
£5.51 inc VAT
Brand: TECO
Model: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Approx. 400 nails per kilo in a bag. Nail directly into timber...
£4.50
£5.40 inc VAT
Brand: TECO
Model: HD1500B100
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£4.24
£5.09 inc VAT
Brand: TECO
Model: FHMR140
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.21
£1.45 inc VAT
Brand: TECO
Model: STUDBZPM8
Delivery Time: In stock, 1-2 days
M8 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stai..
£1.79
£2.15 inc VAT
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.64
£1.97 inc VAT