63x300mm Woody Standard Joist Hanger
63x300mm Woody Standard Joist Hanger
Price: £1.10 (£1.32 inc VAT)
- Product Code: A1-5173
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: STD - 63x300
- Weight: 203.00g
63x300mm Woody Standard Joist Hanger
Width: 63mm
Height: 300mm
Thickness: 0.8mm
Weight: 203g
63x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly contribute to faster and more accurate installation and to avoid unnecessary rotation. This tag can easily be bent if it is not necessary.
Long term safe working load = 6 kN. The hangers have been accordingly tested by Ceram Research. The test results are available upon request.
.png)
FIXING INSTRUCTIONS for 63x300mm Woody Standard Joist Hanger
- 30mm x 3.75mm Square Twisted nails should be used for nailing the holes during installation.
- For stainless steel products use 30mm x 3.75mm stainless steel annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- The tag can be bent if not required.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: WM63x150
Delivery Time: 2 - 4 days
63mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.30
£5.16 inc VAT
Brand: TECO
Model: WR90X250R100
Delivery Time: 2 - 4 days
90mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.98
£8.38 inc VAT
Brand: TECO
Model: PR
Delivery Time: In stock, 1-2 days
6mm Anker-it Yellow Plug is a standard red coloured plastic plug for 6mm hole diameter and 34mm in length. FeaturesAnchor hole size - 6mmPlug length - 34mmMin. anchor hole length - 40mmWood screw size - 3.5mm to 5mm ..
£1.04
£1.25 inc VAT
Brand: TECO
Model: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
-250x250.png "Heavy Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model: HD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£2.83
£3.40 inc VAT