47x225mm - R140mm Masonry Return Hanger
47x225mm - R140mm Masonry Return Hanger
Price: £4.45 (£5.34 inc VAT)
- Product Code: A1-5744
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X225R140
- Weight: 664.00g
47x225mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 225mm
Weight: 664g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x225mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: HD900B100
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 900mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APPL..
£2.55
£3.06 inc VAT
Brand: TECO
Model and Size: MMINI - 44x68
Delivery Time: In stock, 1-2 days
44x68mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
£0.53
£0.64 inc VAT
Brand: TECO
Model and Size: WM63x100
Delivery Time: 2 - 4 days
63mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.13
£4.96 inc VAT
Brand: TECO
Model and Size: WM50x200
Delivery Time: 2 - 4 days
50mm x 200mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.41
£2.89 inc VAT
Brand: TECO
Model and Size: WSTDGM20
Delivery Time: In stock, 1-2 days
Diameter: 37mm M20 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£4.64
£5.57 inc VAT
Brand: TECO
Model and Size: WR100X225R100
Delivery Time: 2 - 4 days
100mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but ..
£5.84
£7.01 inc VAT