Heavy Duty Restraint Strap 1200mm Flat

Heavy Duty Restraint Strap 1200mm Flat
Rate this product
Heavy Duty Restraint Strap 1200mm Flat
Price: £3.58 (£4.30 inc VAT)
  • Product Code: A1-5401
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1200F
  • Weight: 1,116.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Heavy Duty Restraint Strap 1200mm Flat

Length: 1200mm
Width: 28mm
Thickness: 4mm
Weight: 1116g

Galvanised Heavy Duty Restraint Strap 1200mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
Brand: TECO Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to  concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275.  ..
£1.70
£2.04 inc VAT
5x100mm Ultimate Wood Screws - box of 100
Brand: TECO Model: US5x100
Delivery Time: In stock, 1-2 days
5x100mm Ultimate Wood Screws - box of 100
5x100mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc ..
£11.29
£13.55 inc VAT
47x200mm - R100mm Masonry Return Hanger
Brand: TECO Model: FHMR47X200R100
Delivery Time: In stock, 1-2 days
47x200mm - R100mm Masonry Return Hanger
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£6.51
£7.81 inc VAT
Stainless Steel Double Triangle Wall Tie - pack of 250
Brand: TECO Model: WTDT-250/250
Delivery Time: In stock, 1-2 days
Stainless Steel Double Triangle Wall Tie - pack of 250
Stainless Steel Double Triangle Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements o..
£108.00
£129.60 inc VAT
900mm x 50m Galvanised Steel Hex mesh Netting
Brand: TECO Model: HM900
Delivery Time: In stock, 1-2 days
900mm x 50m Galvanised Steel Hex mesh Netting
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
44x125mm Welded Masonry Joist Hanger
Brand: TECO Model: WM44x125
Delivery Time: 2 - 4 days
44x125mm Welded Masonry Joist Hanger
44mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£2.14
£2.57 inc VAT