Light Duty Restraint Strap 200mm Flat

Light Duty Restraint Strap 200mm Flat
Rate this product
Light Duty Restraint Strap 200mm Flat
Price: £0.55 (£0.66 inc VAT)
  • Product Code: A1-5367
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD200F
  • Weight: 102.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 200mm Flat

Length: 200mm
Width: 28mm
Thickness: 2.4mm
Weight: 102g

Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Light Duty Restraint Strap 600mm Twisted 100mm
Brand: TECO Model: LD600T100
Delivery Time: In stock, 1-2 days
Light Duty Restraint Strap 600mm Twisted 100mm
Galvanised Light Duty Restraint Strap 600mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
£1.10
£1.32 inc VAT
165mm Helical Flat Roof Fixings for 96-126mm panels
Brand: TECO Model: HFR165
Delivery Time: In stock, 1-2 days
165mm Helical Flat Roof Fixings for 96-126mm panels
165mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 96-126mm thick panels.  Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent bending during installatio..
£0.58
£0.70 inc VAT
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
Brand: TECO Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to  concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275.  ..
£1.70
£2.04 inc VAT
Helical Bar Grout HG3 - 3 Litres
Brand: TECO Model: HG3
Delivery Time: In stock, 1-2 days
Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection with a hand or power applicator. It has a low liquid to powder ratio, which gives the thixotropic ability - the grout would flow sufficiently to form a uniform layer, then to res..
£64.34
£77.21 inc VAT
Standard Round Washers M24 - box of 25
Brand: TECO Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Standard Round Washers M24 - box of 25
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.10
£9.72 inc VAT
50x50mm Galvanised Steel Bolt Down Shoe
Brand: TECO Model: FB50
Delivery Time: In stock, 1-2 days
50x50mm Galvanised Steel Bolt Down Shoe
50x50mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. Installation To bolt down onto existing concrete. Suggested fixing 10 x 80mm sleeve anchor...
£10.59
£12.71 inc VAT