76mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
76mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Price: £1.38 (£1.66 inc VAT)
- Product Code: A1-5316
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TCSS 76mm M16
- Weight: 38.00g
76mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Weight: 38g
Diameter: 76mm
Teeth Size: 1.2mm
76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-galvanised steel, in accordance to the BS EN 10346:2004 DX51D+Z275. Also available in stainless steel option.
SPECIFICATION
All the products are manufactured in accordance with the BS EN 14545:2008.
INSTALLATION
Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model and Size: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT
-250x250.png "Light Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model and Size: LD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset c..
£1.74
£2.09 inc VAT
Brand: TECO
Model and Size: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model and Size: FHM47/125
Delivery Time: In stock, 1-2 days
47mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.99
£2.39 inc VAT
Brand: TECO
Model and Size: WM50x100
Delivery Time: 2 - 4 days
50mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£1.90
£2.28 inc VAT
Brand: TECO
Model and Size: RLS
Delivery Time: In stock, 1-2 days
Stainless Steel Rib Lath is stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern tha..
£29.11
£34.93 inc VAT