100mm Damp Proof Course - DPC
100mm Damp Proof Course - DPC
Price: £3.39 (£4.07 inc VAT)
- Product Code: A1-5636
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPC100
- Weight: 1,060.00g
100mm Damp Proof Course - DPC
Length: 30000mm
Width: 100mm
Weight: 1060g
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.
Specification
- 500mu.
- Produced to BS 6515:84.
- Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
- Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
- The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM.
Brand: TECO
Model: US4x60
Delivery Time: In stock, 1-2 days
4x60mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£8.91
£10.69 inc VAT
Brand: TECO
Model: GTS - 38x300
Delivery Time: In stock, 1-2 days
38mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£2.24
£2.69 inc VAT
Brand: TECO
Model: WT-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£35.08
£42.10 inc VAT
Brand: TECO
Model: WM63x125
Delivery Time: 2 - 4 days
63mm x 125mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.14
£4.97 inc VAT
Brand: TECO
Model: TCSS 76mm M16
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.38
£1.66 inc VAT
Brand: TECO
Model: WM50x175
Delivery Time: 2 - 4 days
50mm x 175mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.08
£2.50 inc VAT