150x450mm Woody Long Leg Joist Hanger
150x450mm Woody Long Leg Joist Hanger
Price: £6.45 (£7.74 inc VAT)
- Product Code: A1-5041
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 150x450
- Weight: 400.00g
150x450mm Woody Long Leg Joist Hanger
Width: 150mm
Height: 450mm
Thickness: 1.4mm
Weight: 400g
150x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 150x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£24.00
£28.80 inc VAT
Brand: TECO
Model: PBPS15/17
Delivery Time: In stock, 1-2 days
Plaster depth 15-17mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.56
£4.27 inc VAT
Brand: TECO
Model: HD1000T100
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1000mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ..
£2.99
£3.59 inc VAT
Brand: TECO
Model: TRS1200B100
Delivery Time: In stock, 1-2 days
1200mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.30
£2.76 inc VAT
Brand: TECO
Model: WM125x150
Delivery Time: 2 - 4 days
125mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.84
£5.81 inc VAT
Brand: TECO
Model: FHM47/100
Delivery Time: In stock, 1-2 days
47mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.90
£2.28 inc VAT