All Products
CHOOSE MANUFACTURERS
Brand: TECO
Model and Size: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.25
£3.90 inc VAT
Brand: TECO
Model and Size: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Approx. 400 nails per kilo in a bag. Nail directly into timber...
£4.50
£5.40 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model and Size: TCW38
Delivery Time: In stock, 1-2 days
38mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: MFT38/346BA - 38x154
Delivery Time: In stock, 1-2 days
38mm x 154mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base locati..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: LL - 38x450
Delivery Time: In stock, 1-2 days
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. ..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: PSTCG2.4
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular ex..
£3.05
£3.66 inc VAT
Brand: TECO
Model and Size: MFT44/346BA - 44x151
Delivery Time: In stock, 1-2 days
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: WR44X200R100
Delivery Time: 2 - 4 days
44mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT
Brand: TECO
Model and Size: TIJ-TI - 45x240mm
Delivery Time: In stock, 1-2 days
45x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = ..
£1.69
£2.03 inc VAT
Brand: TECO
Model and Size: FHMR47X100R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.06
£3.67 inc VAT
Brand: TECO
Model and Size: FHMR47X125R100
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.26
£3.91 inc VAT
Brand: TECO
Model and Size: FHMR47X150R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: MFT47/346BA - 47x150
Delivery Time: In stock, 1-2 days
47mm x 150mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: FHMR47X175R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT
Brand: TECO
Model and Size: FHMR47X200R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.70
£4.44 inc VAT
Brand: TECO
Model and Size: FHMR47X225R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.95
£4.74 inc VAT
Brand: TECO
Model and Size: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if required...
£44.38
£53.26 inc VAT
Brand: TECO
Model and Size: TAPEDW50
Delivery Time: In stock, 1-2 days
50mm wide professional internal plastering joint tape. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. Installation Tapered drywall joints have special edges that provide a pocket for joint compound and tape. Mix the sett..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.30
£0.36 inc VAT
Brand: TECO
Model and Size: MFT50/346BA - 50x148
Delivery Time: In stock, 1-2 days
50mm x 148mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT
Brand: TECO
Model and Size: WR50X200R100
Delivery Time: 2 - 4 days
50mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT
Brand: TECO
Model and Size: AB50
Delivery Time: In stock, 1-2 days
50x15mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.88
£1.06 inc VAT
Brand: TECO
Model and Size: FB50
Delivery Time: In stock, 1-2 days
50x50mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. Installation To bolt down onto existing concrete. Suggested fixing 10 x 80mm sleeve anchor...
£10.59
£12.71 inc VAT
Brand: TECO
Model and Size: FS50x450
Delivery Time: In stock, 1-2 days
50x50mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm, Support height: 450mm..
£11.11
£13.33 inc VAT
Brand: TECO
Model and Size: TBFlange5x50
Delivery Time: In stock, 1-2 days
5x50 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£16.11
£19.33 inc VAT
Brand: TECO
Model and Size: TBCSK5x75
Delivery Time: In stock, 1-2 days
5x75 Countersunk Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Ho..
£20.98
£25.18 inc VAT
Brand: TECO
Model and Size: RLG
Delivery Time: In stock, 1-2 days
Galvanised Rib Lath is stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying o..
£13.98
£16.78 inc VAT
Brand: TECO
Model and Size: RLS
Delivery Time: In stock, 1-2 days
Stainless Steel Rib Lath is stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern tha..
£29.11
£34.93 inc VAT
Brand: TECO
Model and Size: EMLG63
Delivery Time: In stock, 1-2 days
63mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. Specification Galvanised steel EN 10346 DX51D Z275, Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together...
£6.64
£7.97 inc VAT