Heavy Duty Restraint Strap 1500mm Flat

Heavy Duty Restraint Strap 1500mm Flat
Rate this product
Heavy Duty Restraint Strap 1500mm Flat
Price: £4.48 (£5.38 inc VAT)
  • Product Code: A1-5413
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1500F
  • Weight: 1,395.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Heavy Duty Restraint Strap 1500mm Flat

Length: 1500mm
Width: 28mm
Thickness: 4mm
Weight: 1395g

Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

225mm Stainless Steel Housing Tie - pack of 250
Brand: TECO Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie - pack of 250
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements of BS EN..
£36.00
£43.20 inc VAT
76x150mm Heavy Duty Face Fix Joist Hanger
Brand: TECO Model: HWTNT76
Delivery Time: 2 - 3 Days
76x150mm Heavy Duty Face Fix Joist Hanger
76mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings.  The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAll hangers come ..
£4.73
£5.68 inc VAT
63x225mm Welded Masonry Joist Hanger
Brand: TECO Model: WM63x225
Delivery Time: 2 - 4 days
63x225mm Welded Masonry Joist Hanger
63mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£5.11
£6.13 inc VAT
Light Duty Restraint Strap 1000mm Twisted 100mm
Brand: TECO Model: LD1000T100
Delivery Time: In stock, 1-2 days
Light Duty Restraint Strap 1000mm Twisted 100mm
Galvanised Light Duty Restraint Strap 1000mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFI..
£1.83
£2.20 inc VAT
225mm Stainless Steel General Purpose Wall Tie - pack of 250
Brand: TECO Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie - pack of 250
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirem..
£66.00
£79.20 inc VAT
100mm Stainless Steel Frame Cramp
Brand: TECO Model: FFCS150
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Frame Cramp
100mm Stainless Steel Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in Grade 1.430..
£0.88
£1.06 inc VAT