63x220mm Multifunctional Joist Hanger
63x220mm Multifunctional Joist Hanger
Price: £3.09 (£3.71 inc VAT)
- Product Code: A1-5250
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT63/504BA - 63x220
- Weight: 640.00g
63x220mm Multifunctional Joist Hanger
Width: 63mm
Height: 220mm
Thickness: 2mm
Weight: 640g
63mm x 220mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 63x220mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WM63x200
Delivery Time: 2 - 4 days
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£5.00
£6.00 inc VAT
Brand: TECO
Model: PSG2.4x13
Delivery Time: In stock, 1-2 days
13mm Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regular exposure to..
£2.29
£2.75 inc VAT
Brand: TECO
Model: STD - 150x300
Delivery Time: In stock, 1-2 days
150x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significantly c..
£3.35
£4.02 inc VAT
Brand: TECO
Model: HD1300B100
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1300mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£3.88
£4.66 inc VAT
Brand: TECO
Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is located on ..
£36.94
£44.33 inc VAT
Brand: TECO
Model: HD2000F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 2000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£6.60
£7.92 inc VAT