44x450mm Woody Long Leg Joist Hanger
44x450mm Woody Long Leg Joist Hanger
Price: £3.36 (£4.03 inc VAT)
- Product Code: A1-5039
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 44x450
- Weight: 444.00g
44x450mm Woody Long Leg Joist Hanger
Width: 44mm
Height: 450mm
Thickness: 1.4mm
Weight: 444g
44x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 44x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: WM90x175
Delivery Time: 2 - 4 days
90mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.60
£5.52 inc VAT
Brand: TECO
Model: HD1200T100
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1200mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ..
£3.39
£4.07 inc VAT
Brand: TECO
Model: FHM47/100
Delivery Time: In stock, 1-2 days
47mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.80
£2.16 inc VAT
Brand: TECO
Model: STUDBZPM10
Delivery Time: In stock, 1-2 days
M10 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£1.99
£2.39 inc VAT
Brand: TECO
Model: PNP06
Delivery Time: In stock, 1-2 days
6mm Nylon Plug is a standard nylon plug for mm hole diameter and 40mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 6mmPlug length - 40mmMin. anchor hole length - 45mmWood screw size - 3.5mm to 5mm ..
£0.04
£0.05 inc VAT
Brand: TECO
Model: WM63x225
Delivery Time: 2 - 4 days
63mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.84
£5.81 inc VAT