100x240mm Top Fix I-Joist Hanger
100x240mm Top Fix I-Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5849
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: TIJ-TI - 100x240mm
- Weight: 490.00g
100x240mm Top Fix I-Joist Hanger
Width: 100mm
Height: 240mm
Thickness: 0.7mm
Weight: 490g
100x240mm Top Fix I-Joist Hanger is an innovative new backer free Joist Hanger to suit solid engineered wood products as well as I-Joists. It is engineered to combine maximum load carrying capacity with easy hands-free site installation, at minimum cost. Long term safe working load = 4.3 kN. Long term safe working load with enhanced nailing = 8.6 kN.
CHARACTERISTICS
- Unique hands free installation,
- Qualified for use with various nail types,
- Requires less nails,
- Face fix or top fix design,
- Enhanced load carrying option,
- Can be used on solid EWP or I-Joists.
FIXING INSTRUCTIONS for 100x240mm Top Fix I-Joist Hanger
- All standard round holes should be filled with either 2.65 x 40mm or 2.8 x 40mm or 3.4 x 35mm ring-shank nails or 3.75 x 30mm square twist nails.
- Fill diamond shaped holes for enhanced installation to I-Joist with backer blocks or solid LVL or Glulam headers.
- The TIJs unique hands free design locates the hanger on I-Joist headers leaving the installer with both hands free for easier installation.
SPECIFICATION
- 0.7mm pre galvanised mild steel EN 10346 DX51D Z275.
I-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: FS100x700
Delivery Time: In stock, 1-2 days
100x100mm Spiked Post Shoe to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm, Support height: 700mm..
£18.06
£21.67 inc VAT
Brand: TECO
Model and Size: LL - 50x450
Delivery Time: In stock, 1-2 days
50x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.36
£4.03 inc VAT
Brand: TECO
Model and Size: WM100x150
Delivery Time: 2 - 4 days
100mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.45
£5.34 inc VAT
Brand: TECO
Model and Size: TCW50
Delivery Time: In stock, 1-2 days
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.31
£0.37 inc VAT
Brand: TECO
Model and Size: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model and Size: WM100x250
Delivery Time: 2 - 4 days
100mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£6.35
£7.62 inc VAT