47x125mm - R140mm Masonry Return Hanger
47x125mm - R140mm Masonry Return Hanger
Price: £3.76 (£4.51 inc VAT)
- Product Code: A1-5723
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: FHMR47X125R140
- Weight: 478.00g
47x125mm - R140mm Masonry Return Hanger
Width: 47mm
Height: 125mm
Weight: 478g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x125mm - R140mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: TSR 102mm
Delivery Time: In stock, 1-2 days
102mm Split Ring Grooving Tool to cut precision grooves or recesses (daps) for Split Ring and Shear Plate Connectors. The tools consist of a pilot, cutting blades and a depth gauge and can be used with a standard portable drill or drill press. SpecificationManufactured from tool steel.InstallationUs..
£770.00
£924.00 inc VAT
Brand: TECO
Model and Size: TRS1600B100
Delivery Time: In stock, 1-2 days
1600mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to Th..
£2.90
£3.48 inc VAT
Brand: TECO
Model and Size: LL - 63x450
Delivery Time: In stock, 1-2 days
63x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.06
£4.87 inc VAT
Brand: TECO
Model and Size: TBHEX12x150
Delivery Time: In stock, 1-2 days
12x150 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fi..
£48.33
£58.00 inc VAT
Brand: TECO
Model and Size: WSTV
Delivery Time: In stock, 1-2 days
1200mm Ferritic Stainless Steel Wall Starter Kit joins new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Made from Ferritic Stainless Steel (G..
£9.19
£11.03 inc VAT
Brand: TECO
Model and Size: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT