Light Duty Restraint Strap 1200mm Flat
Light Duty Restraint Strap 1200mm Flat
Price: £2.09 (£2.51 inc VAT)
- Product Code: A1-5360
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LD1200F
- Weight: 610.00g
Brand: TECO
Model: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT
Brand: TECO
Model: SBG2.4
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51D Z27..
£1.30
£1.56 inc VAT
Brand: TECO
Model: LL - 90x450
Delivery Time: In stock, 1-2 days
90x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.76
£5.71 inc VAT
Brand: TECO
Model: WM44x175
Delivery Time: 2 - 4 days
44mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.08
£2.50 inc VAT
Brand: TECO
Model: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model: FHMR47X125R115
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£3.50
£4.20 inc VAT