90x450mm Woody Long Leg Joist Hanger
90x450mm Woody Long Leg Joist Hanger
Price: £4.83 (£5.80 inc VAT)
- Product Code: A1-5043
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 90x450
- Weight: 489.00g
90x450mm Woody Long Leg Joist Hanger
Width: 90mm
Height: 450mm
Thickness: 1.4mm
Weight: 489g
90x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 90x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: TCSS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.50
£0.60 inc VAT
Brand: TECO
Model: FHM47/150
Delivery Time: In stock, 1-2 days
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.20
£2.64 inc VAT
Brand: TECO
Model: GGBOLT - M20x180
Delivery Time: In stock, 1-2 days
Size: M20 x 180mmM20 x 180mm Multi Truss Girder Hanger Bolt is a Heavy Duty Girder to Girder Hanger Bolt. The product also offers substantial safe working load of 29kN, tested by BRE.The bolts sets include 120 mm thread 3 no. M20 x 180 XOX BZP Bolts, 3 no. M20 x 65mm BZP Round Washers..
£23.51
£28.21 inc VAT
Brand: TECO
Model: CSHBZPM6x75
Delivery Time: In stock, 1-2 days
6mm - 75mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£20.04
£24.05 inc VAT
Brand: TECO
Model: DS8x2.5
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 4mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£8.96
£10.75 inc VAT
Brand: TECO
Model: TDS250/10
Delivery Time: In stock, 1-2 days
250mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£13.00
£15.60 inc VAT