63x220mm Multifunctional Joist Hanger
63x220mm Multifunctional Joist Hanger
Price: £3.09 (£3.71 inc VAT)
- Product Code: A1-5250
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT63/504BA - 63x220
- Weight: 640.00g
63x220mm Multifunctional Joist Hanger
Width: 63mm
Height: 220mm
Thickness: 2mm
Weight: 640g
63mm x 220mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 63x220mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: FHM50/175
Delivery Time: In stock, 1-2 days
50mm x 175mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.41
£2.89 inc VAT
Brand: TECO
Model: FHMR47X150R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£4.32
£5.18 inc VAT
Brand: TECO
Model: EMLS100
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gloves should be..
£31.37
£37.64 inc VAT
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFICATIO..
£0.55
£0.66 inc VAT
Brand: TECO
Model: SHORTLEG - 50x135
Delivery Time: In stock, 1-2 days
50mm x 135mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contribute to faster and more accurat..
£0.69
£0.83 inc VAT
Brand: TECO
Model: GBCLIP225/50
Delivery Time: In stock, 1-2 days
225mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to fence posts. Width 50mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£2.06
£2.47 inc VAT