47x229mm Multifunctional Joist Hanger
47x229mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5257
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT47/504BA - 47x229
- Weight: 624.00g
47x229mm Multifunctional Joist Hanger
Width: 47mm
Height: 229mm
Thickness: 2mm
Weight: 624g
47mm x 229mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 47x229mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
-250x250.png "Light Duty Restraint Strap 1000mm Twisted 150mm")
Brand: TECO
Model: LD1000T150
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Twisted 150mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset c..
£1.74
£2.09 inc VAT
Brand: TECO
Model: ERSG2.4
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.08
£2.50 inc VAT
Brand: TECO
Model: MFT150/504BA - 150x177
Delivery Time: In stock, 1-2 days
150mm x 177mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£3.05
£3.66 inc VAT
Brand: TECO
Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.25
£7.50 inc VAT
Brand: TECO
Model: SBG2.4
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51D Z27..
£1.30
£1.56 inc VAT