47x150mm Multifunctional Joist Hanger
47x150mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5255
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT47/346BA - 47x150
- Weight: 429.00g
47x150mm Multifunctional Joist Hanger
Width: 47mm
Height: 150mm
Thickness: 2mm
Weight: 429g
47mm x 150mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 47x150mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: LL - 76x600
Delivery Time: In stock, 1-2 days
76mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.69
£5.63 inc VAT
Brand: TECO
Model: WST
Delivery Time: In stock, 1-2 days
Stainless Steel Wall Starter systems WST join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Type WST is made from Austenitic Stainless Steel (G..
£5.50
£6.60 inc VAT
Brand: TECO
Model: EMLS100
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
£28.41
£34.09 inc VAT
Brand: TECO
Model: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model: TCSS 63mm M12
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.44
£0.53 inc VAT
Brand: TECO
Model: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT