90x128mm Multifunctional Joist Hanger
90x128mm Multifunctional Joist Hanger
Price: £2.28 (£2.74 inc VAT)
- Product Code: A1-5264
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT90/346BA - 90x128
- Weight: 429.00g
90x128mm Multifunctional Joist Hanger
Width: 90mm
Height: 128mm
Thickness: 2mm
Weight: 429g
90mm x 128mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 90x128mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: FHMR47X200R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£6.51
£7.81 inc VAT
Brand: TECO
Model: TCSS 50mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mmSingle Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. ..
£3.12
£3.74 inc VAT
Brand: TECO
Model: WM125x150
Delivery Time: 2 - 4 days
125mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.84
£5.81 inc VAT
Brand: TECO
Model: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Approx. 400 nails per kilo in a bag. Nail directly into timber...
£4.50
£5.40 inc VAT
Brand: TECO
Model: NP170x350
Delivery Time: In stock, 1-2 days
170x350mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£88.20
£105.84 inc VAT
Brand: TECO
Model: TBHEX8x60
Delivery Time: In stock, 1-2 days
6x60 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fixt..
£47.93
£57.52 inc VAT