90x128mm Multifunctional Joist Hanger
90x128mm Multifunctional Joist Hanger
Price: £2.28 (£2.74 inc VAT)
- Product Code: A1-5264
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT90/346BA - 90x128
- Weight: 429.00g
90x128mm Multifunctional Joist Hanger
Width: 90mm
Height: 128mm
Thickness: 2mm
Weight: 429g
90mm x 128mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 90x128mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: PB6/10
Delivery Time: In stock, 1-2 days
Plaster depth 6-10mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.43
£4.12 inc VAT
Brand: TECO
Model: MFT100/346BA - 100x123
Delivery Time: In stock, 1-2 days
100mm x 123mm Multifunctional Joist Hanger 100 x 123mm is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It in..
£2.28
£2.74 inc VAT
Brand: TECO
Model: WM44x175
Delivery Time: 2 - 4 days
44mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£2.20
£2.64 inc VAT
Brand: TECO
Model: WM100x300
Delivery Time: 2 - 4 days
100mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£12.93
£15.52 inc VAT
Brand: TECO
Model: HWTNT150
Delivery Time: 2 - 3 Days
150mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.69
£12.83 inc VAT
Brand: TECO
Model: ABLD
Delivery Time: In stock, 1-2 days
50x50mm Heavy duty angle bracket is a versatile, general purpose 90-degree bracket used to strengthen timer joists, roof trusses etc. SpecificationPre Galvanised Mild Steel SD280GD+Z275Fixing InstructionsThe TECO Angle Bracket is the ultimate angle cleat using either Bolts, Co..
£0.59
£0.71 inc VAT