125x140mm Multifunctional Joist Hanger
125x140mm Multifunctional Joist Hanger
Price: £2.60 (£3.12 inc VAT)
- Product Code: A1-5272
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT125/404BA - 125x140
- Weight: 501.00g
125x140mm Multifunctional Joist Hanger
Width: 125mm
Height: 140mm
Thickness: 2mm
Weight: 501g
125mm x 140mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 125x140mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WM90x200
Delivery Time: 2 - 4 days
90mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.31
£6.37 inc VAT
Brand: TECO
Model: HI300/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£3.28
£3.94 inc VAT
Brand: TECO
Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.93
£8.32 inc VAT
Brand: TECO
Model: FHMR47X225R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.43
£5.32 inc VAT
Brand: TECO
Model: HBH8/2000
Delivery Time: In stock, 1-2 days
8mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£12.44
£14.93 inc VAT
Brand: TECO
Model: MFT125/346BA - 125x110
Delivery Time: In stock, 1-2 days
125mm x 110mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base ..
£2.28
£2.74 inc VAT