44x230mm Multifunctional Joist Hanger
44x230mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5254
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT44/504BA - 44x230
- Weight: 624.00g
44x230mm Multifunctional Joist Hanger
Width: 44mm
Height: 230mm
Thickness: 2mm
Weight: 624g
44mm x 230mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WSTDGM10
Delivery Time: In stock, 1-2 days
Diameter: 20mm M10 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.43
£1.72 inc VAT
Brand: TECO
Model: LD1200B100T
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry and also for horizontal restraint. The straps are produced from edge coated galvanised mild steel, also available in stainless ..
£2.29
£2.75 inc VAT
Brand: TECO
Model: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.56
£3.07 inc VAT
Brand: TECO
Model: WS63x250S100
Delivery Time: 2 - 4 days
Straddle: 100mm63mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned..
£12.74
£15.29 inc VAT
Brand: TECO
Model: CSHBZPM10x180
Delivery Time: In stock, 1-2 days
10mm - 180mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£10.05
£12.06 inc VAT
Brand: TECO
Model: MFT44/346BA - 44x151
Delivery Time: In stock, 1-2 days
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.25
£2.70 inc VAT