125x110mm Multifunctional Joist Hanger
125x110mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5271
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT125/346BA - 125x110
- Weight: 429.00g
125x110mm Multifunctional Joist Hanger
Width: 125mm
Height: 110mm
Thickness: 2mm
Weight: 429g
125mm x 110mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 125x110mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: LD3000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes...
£5.20
£6.24 inc VAT
Brand: TECO
Model and Size: WM125x100
Delivery Time: 2 - 4 days
125mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the tim..
£4.45
£5.34 inc VAT
Brand: TECO
Model and Size: PBPS6/8
Delivery Time: In stock, 1-2 days
Plaster depth 6-8mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resist..
£3.08
£3.70 inc VAT
Brand: TECO
Model and Size: MFM - 100x70
Delivery Time: In stock, 1-2 days
Multifunctional Mini Joist Hanger 100 x 70mm is one of 1.6mm Face Fix Joist Hangers, available in five different sizes with a 86mm bearing. The hanger is produced from pre-galvanised mild steel thickness of only 1,6mm, all in accordance with the specification given in the BS EN 10327:2004 ..
£1.73
£2.08 inc VAT
Brand: TECO
Model and Size: HB400
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB400 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requirements fo..
£0.46
£0.55 inc VAT
Brand: TECO
Model and Size: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT