44x151mm Multifunctional Joist Hanger
44x151mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5252
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT44/346BA - 44x151
- Weight: 429.00g
44x151mm Multifunctional Joist Hanger
Width: 44mm
Height: 151mm
Thickness: 2mm
Weight: 429g
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 44x151mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: ERSG2.4
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.08
£2.50 inc VAT
Brand: TECO
Model and Size: WR75X250R100
Delivery Time: 2 - 4 days
75mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.16
£7.39 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 63mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.20
£3.84 inc VAT
Brand: TECO
Model and Size: TBHEX8x75
Delivery Time: In stock, 1-2 days
8x75 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fixt..
£55.43
£66.52 inc VAT
Brand: TECO
Model and Size: LL - 132x450
Delivery Time: In stock, 1-2 days
132mm x 450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the supp..
£6.36
£7.63 inc VAT
Brand: TECO
Model and Size: WM50x225
Delivery Time: 2 - 4 days
50mm x 225mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.48
£2.98 inc VAT