50x177mm Multifunctional Joist Hanger
50x177mm Multifunctional Joist Hanger
Price: £2.58 (£3.10 inc VAT)
- Product Code: A1-5259
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT50/404BA - 50x177
- Weight: 501.00g
50x177mm Multifunctional Joist Hanger
Width: 50mm
Height: 177mm
Thickness: 2mm
Weight: 501g
50mm x 177mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 50x177mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: LD220F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£69.44
£83.33 inc VAT
Brand: TECO
Model: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.44
£4.13 inc VAT
Brand: TECO
Model: DPC150
Delivery Time: In stock, 1-2 days
150mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£5.04
£6.05 inc VAT
Brand: TECO
Model: TAPEDW50
Delivery Time: In stock, 1-2 days
50mm wide professional internal plastering joint tape. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. Installation Tapered drywall joints have special edges that provide a pocket for joint compound and tape. Mix the sett..
£4.24
£5.09 inc VAT
Brand: TECO
Model: WR90X250R100
Delivery Time: 2 - 4 days
90mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.98
£8.38 inc VAT