47x150mm Multifunctional Joist Hanger
47x150mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5255
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT47/346BA - 47x150
- Weight: 429.00g
47x150mm Multifunctional Joist Hanger
Width: 47mm
Height: 150mm
Thickness: 2mm
Weight: 429g
47mm x 150mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 47x150mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: MFT47/404BA - 47x179
Delivery Time: In stock, 1-2 days
47mm x 179mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.58
£3.10 inc VAT
Brand: TECO
Model: MFT76/404BA - 76x164
Delivery Time: In stock, 1-2 days
76mm x 164mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It inclu..
£2.58
£3.10 inc VAT
Brand: TECO
Model: HWTNT63
Delivery Time: 2 - 3 Days
63mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.36
£5.23 inc VAT
Brand: TECO
Model: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£4.91
£5.89 inc VAT
Brand: TECO
Model: TCSS 76mm M16
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£1.38
£1.66 inc VAT
Brand: TECO
Model: EB3x15
Delivery Time: In stock, 1-2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT