76x135mm Multifunctional Joist Hanger
76x135mm Multifunctional Joist Hanger
Price: £2.28 (£2.74 inc VAT)
- Product Code: A1-5261
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT76/346BA - 76x135
- Weight: 429.00g
76x135mm Timber to Timber Multifunctional Joist Hanger
Width: 76mm
Height: 135mm
Thickness: 2mm
Weight: 429g
76mm x 135mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 76x135mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: FHMR47X100R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be ..
£3.98
£4.78 inc VAT
Brand: TECO
Model: SRTCSS 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Stainless Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is split across a..
£20.73
£24.88 inc VAT
Brand: TECO
Model: WR63X225R100
Delivery Time: 2 - 4 days
63mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.50
£6.60 inc VAT
Brand: TECO
Model: LL - 38x450
Delivery Time: In stock, 1-2 days
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls..
£3.41
£4.09 inc VAT
Brand: TECO
Model: FS50x450
Delivery Time: In stock, 1-2 days
50x50mm Spiked Post Shoe is used to hold fence posts above ground level, suitable for standard soil conditions. Galvanised and Powder Coated Brown colour. Shoe height: 150mm, Support height: 450mm..
£11.30
£13.56 inc VAT
Brand: TECO
Model: PBPS20/122
Delivery Time: In stock, 1-2 days
Plaster depth 20-22mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£4.09
£4.91 inc VAT